App - RsysConfig

Starting out with RsysConfig and Spec-Driven Piping
1) When you open Creo, you should see a tab for "CadActive" in the ribbon. If you do not see it, please install it and make sure your config.pro i...
Tue, 19 Nov, 2019 at 4:35 PM
Spec-Driven Piping Configuration Settings
There are config.pro settings that need to be setup in order for an organization to fully and easily take advantage to the power of Spec-Driven Piping. They...
Wed, 20 Nov, 2019 at 1:56 PM
RsysConfig Definitions
RsysConfig Definitions Size - A pipe or fitting parameter which is a label indicating the OD of the pipe or fitting port.  In the case of a rectangul...
Tue, 28 May, 2019 at 2:58 PM
RsysConfig Decision Flow Chart
See attached flow chart PDF.
Fri, 14 Feb, 2020 at 11:22 AM
First Steps
First Steps with RsysConfig Now, that you have a basic understanding of Spec-Driven Piping, let's get acquainted with RsysConfig.  First step...
Fri, 4 Oct, 2019 at 10:46 AM
Interface
The RsysConfig Interface The first page upon login that you will see is the dashboard.  Its layout is straightforward.     The right side has a ...
Tue, 28 May, 2019 at 3:01 PM
Sizes
Creating Pipe Sizes Select the SIZES link on the left side navigation panel. When the SIZES page comes up select the button to add the desi...
Tue, 28 May, 2019 at 3:03 PM
Schedules
Creating Pipe Schedules Select the "SCHEDULES" link on the left side navigation panel. When the SCHEDULES page comes up select th...
Tue, 28 May, 2019 at 3:07 PM
Fitting Categories
Creating Fitting Categories Select the "FITTING CATEGORIES" link on the left side navigation panel. When the FITTING CATEGORIES pa...
Fri, 4 Oct, 2019 at 10:47 AM
Fit Cat Icons
Fitting Category Icon Files Every Fitting Category is allowed to have an icon - this is the image that is shown in the "Insert Fitting" GUI in...
Tue, 28 May, 2019 at 3:11 PM