reference
Komax Export
Export a Komax wire list from the current cabling assembly (from/to, strip lengths, marks, and wire length).
Komax Export is a Cabling report. It writes a wire list intended for a Komax machine: sequence, from/to component and pin, strip length, wire marks, and length. The picker name is Komax Export.
When to run it
Run it on a cabling assembly whose harness wires should be cut, stripped, and marked. Current model must be an assembly.
How to run it
Where | How |
|---|---|
Creo | Generate a Report or Cabling ribbon Cabling Reports — pick Komax Export. |
Command line | Reporting Command Line with |
Auto Export | Check this report in Auto Export, then Run Exports. See Auto Export. |
Web | No web catalog. |
Default file type follows Settings for Reporting.
Output columns
Column | What it shows |
|---|---|
Base number | Sequence from 1 to N (all wires in the panel). |
Harness # | Bundle identifier when more than one bundle is cut. |
Sequence # | Install order within a bundle (each bundle restarts at 1). |
Wire Name | Unique wire identifier. |
Wire Gauge | Gauge. |
Color | Color. |
Spool | Spool name. |
From Component / From Pin | Start component and pin. |
From Strip Length | Strip length at the from end. |
From Terminal | Terminal or lug at the from end. |
From Wire Mark | Text printed on the from-end marker. |
From Direction | Print direction at the from end (Komax supports two directions). |
To Component / To Pin | End component and pin. |
To Strip Length | Strip length at the to end. |
To Terminal | Terminal or lug at the to end. |
To Wire Mark | Text printed on the to-end marker. |
To Direction | Print direction at the to end. |
Wire Length | Cut length. |
Wire part # | Wire part number from the spool. |